Ubiquiti G2 Starter Kit, Door Hub, G2 Reader, 10x Access Cards, PoE Passthrough, White & Blue LEDs, Polycarbonate & Glass Material, IP55 Weatherproofing, White | UA-G2-SK
- Availability:
- In Stock
- Product Code:
- G2 Starter Kit
- Brand:
- Ubiquiti
QAR 1,144.81
QAR 1,071.96
You save QAR 72.85
Micro Less
G2 Starter Kit
A quick start for Access with all you need for one door with one reader.
Features
- (1) Door Hub
- (1) G2 Reader
- (10) Access Cards
Specifications
| UA-Hub-Door | Details |
|---|---|
| Mechanical | |
| Dimensions | 174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3") |
| Weight | 363 g (12.8 oz) |
| Enclosure material | Polycarbonate |
| Mounting material | Polycarbonate |
| Hardware | |
| Networking interface | (5) 10/100/1000 Base-T |
| Power method | PoE++ |
| UL 294 Power-limited Class 2 PSU | UL 60950/62368 LPS/PS2 PSU |
| Max. power consumption | Without PoE output: 30W |
| With PoE output: 50W | |
| PoE input | 50V DC, 1A |
| PoE output | PoE passthrough, (4) PoE, 50V DC, total 20W |
| Button | (1) Factory-reset |
| LEDs | System: white/blue |
| Output relays: white | |
| Digital input | Request to exit/request to enter/remote release/door position sensor |
| Dry output relay | Lock: 30V DC, 1A |
| Aux: 30V DC, 1A | |
| Powered output relay | Lock: 12V DC, 1A |
| Aux: 12V DC, 0.33A | |
| 12V DC, 0.33A | |
| Operating environment | Indoor use only |
| Operating temperature | 0 to 40° C (32 to 104° F) |
| Operating humidity | 5 to 95% noncondensing |
| UL 294 level | Destructive attack: Level I |
| Line security: Level I | |
| Endurance: Level I | |
| Standby power: Level I | |
| UL 294 statement | Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| CAN/ULC-60839-11-1 Grade | Grade assignment: 1 |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| Document number, and issue date and/or revision level | UA-Hub-Door002, V01 |
| Wiring Information | Details | |||
| Wiring gauge requirements (AWG) | ||||
| Total length to device | Output load current at 12V DC | |||
| 100mA | 250mA | 500mA | 1A | |
| 6.1 m (20 ft) | 22 | 22 | 22 | 18 |
| 15.2 m (50 ft) | 22 | 22 | 22 | 18 |
| 30.5 m (100 ft) | 22 | 22 | 18 | 18 |
| UACC-Cable-DoorLockRelay (18 AWG) is recommended. | ||||
| PoE cabling requirements | The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 24 AWG (0.21 mm2) for horizontal or riser cable. | |||
| UA-G2 | Details |
|---|---|
| Mechanical | |
| Dimensions | 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4") |
| Weight | 82 g (2.9 oz) |
| Enclosure material | Polycarbonate, glass |
| Mounting | In wall, gang box |
| Weatherproofing | IP55 |
| Hardware | |
| Networking interface | (1) 10/100 MbE RJ45 port |
| Connectivity | BLE 4.1 |
| Power method | PoE |
| UL 294 Power-limited Class 2 PSU | UL 60950-1/62368-1 LPS/PS2 PSU |
| Supported voltage range | 48V DC |
| Max. power consumption | 5W |
| ESD/EMP protection | Air: ±15kV, contact: ±8kV |
| Sensors | Proximity sensor |
| Speaker | (1) 8 ohm, 0.7W |
| LEDs | R/G/B/W |
| Button | (1) Factory-reset |
| NFC frequency | 13.56 MHz |
| NFC read range | < 30 mm |
| NFC standards | ISO 14443A, 14443B, 15693 |
| NFC technology | NFC Tag 1,2,3,4,5 |
| MIFARE Classic | |
| MIFAREPlus | |
| MIFARE Ultralight | |
| MIFARE DESFire | |
| Operating environment | Outdoor use |
| Operating temperature | -30 to 45° C (-22 to 113° F) |
| Operating humidity | 5 to 90% noncondensing |
| UL 294 level | Destructive attack: Level I |
| Line security: Level I | |
| Endurance: Level I | |
| Standby power: Level I | |
| UL 294 statement | Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. PoE cabling requirements: Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm2) for patch cords; 24 AWG (0.21 mm2) for horizontal or riser cable. |
| CAN/ULC-60839-11-1 Grade | Grade assignment: I |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| Document number, and issue date and/or revision level | UA-G2/UA-G2-Black, V02 |
| LED System | Steady blue: Adopted/device is ready |
| Steady white: Pending adoption | |
| Blinking white/blue: Upgrading firmware | |
| Strobing red: Emergency lockdown | |
| UA-Card | Details |
| Mechanical | |
| Dimensions | 85.6 x 53.98 x 0.84 mm (3.37 x 2.13 x 0.03") |
| Weight | 5 g (0.18 oz) |
| Format | ISO 7810 ID-1 |
| NFC frequency | 13.56 MHz |
| NFC technology | ISO/IEC 14443 Type A UniFi Access Proprietary Security Protocol |
| MIFARE technology | MIFARE DESFire |
General
Brand
- UBIQUITI
Model
- G2 Starter Kit
Microless SKU
- 144314
Date first available
- 11 January, 2024
Shipping Weight
- 1.35 Kg
Shipping Dimensions
- 8.50 cm x 24.50 cm x 21.01 cm
This website is designed to help you find the best prices for products in Qatar. It's a specialized platform that lets you easily search for product prices in the market. Just type the name or number of the product you're looking for in the search box above, hit the search button, and we'll display the results sorted by the best price.
