Clean and degreased surfaces are important so that thermal conductive materials such as thermal pastes or liquid metal can adhere well and thus develop their full thermal conductivity. This is where TG Cleaning Wipes come into play: cleaning cloths for cleaning surfaces. TG Cleaning Wipes contain ten double packs, each with two dry wipes and two wet wipes optimized for removing thermal paste residues. Wet wipes for the removal of thermal pastes Removes grease residues (e.g. fingerprints) Packed in ten double packs for easy storage A total of 20 dry wipes and 20 wet wipes First, stubborn dirt is removed with a dry wipe before the surface is cleaned with the two wet wipes. In the third cleaning step, the surface is dried and then wiped with a fresh dry cloth. Assembly aids such as the TG Kapton Insulation Sheet or the TG Shield protective coating also adhere better to cleaned surfaces. TG Cleaning Wipes are available as a practical complete set of 40 cleaning wipes, which are packaged in ten double packs of two dry wipes and two wet wipes. Scope of delivery 10x TG Cleaning Wipes set (2 wet and 2 dry wipes)