DECATHLON 20" 1.5/1.9 schrader valve inner tube | Inner tube

This inner tube is suitable for 20" diameter tyres with 1.50 to 1.90 section with a 33mm Schrader valve.

To remove your inner tube, the tools you'll need are:

An essential tool for removing an inner tube:B’TWIN tyre levers.

Checks to carry out before installing an inner tube:

Make sure that the rim tape covers all the spoke holes.A cracked or misaligned rim tape can damage the inner tube.The rim tape must be centred, clean and in good condition.Replace the rim tape if it is cracked, stiff or worn.New rim tape effectively protects your inner tube from pinching.Use rim tape that is suitable for the width and diameter of your rim.Good rim tape prevents internal punctures caused by the spoke heads.

Inflating a tyre:

The ideal pressure is indicated on the sidewall of the tyreInflate carefully and check that the tyre remains correctly positioned.

How to change an inner tube

Follow our video guide before you start.A slight amount of air pressure in the inner tube will prevent pinching.Insert the valve, position the inner tube correctly in the tyre and then in the rim.

Find more information available with this link:

https://conseilsport.decathlon.fr/comment-changer-sa-chambre-a-air

Weight:

121 g

Pro advice:

Inflate your tyres before every ride to reduce the risk of punctures and ride more efficiently.

How to choose an inner tube:

To maintain your bike properly, it's important to know the exact dimensions of your tyres.This information can be found on the sidewall of the tyre (diameter and section).For example, 20 x 1.60 means a tyre with a diameter of 20 inches and a width of 1.60 inches.On the sidewall, you will also find the dimensions in mm in the international ETRTO unit.For example, 40-406 means a tyre that is 40 mm wide and has an inner diameter of 406 mm (i.e. 20 x 1.60).

Fitting a tyre:

Start at the valve and work your way to the opposite side.Do not tighten with a tyre lever to avoid the risk of punctures.

20" Schrader inner tube (large valve) for 20-inch tyres.

Watertight

Optimised composition to ensure your inner tube has a good seal.

Versatility

20", 1.5 to 1.9 cross section tyres.ETRTO 38/47 - 406

This inner tube is suitable for 20" diameter tyres with 1.50 to 1.90 section with a 33mm Schrader valve.