Audio-Technica AT-VM95C Conical stereo cartridge, Aluminium cantilever, 4.0mV output Compatible body with all VM95, Replacement for AT91, AT91R and CN5625AL | AT-VM95C

  • High Output (4 mV) – Special coil design delivers a strong 4 mV signal at 1 kHz (5 cm/s), outperforming most entry-level cartridges
  • Smooth Tonal Balance – Its 0.6 mil bonded conical stylus offers warm, dynamic playback, praised for lively midrange and ease of use
  • Full Frequency & Good Channel Separation – 20–20,000 Hz response with ~18 dB channel separation ensures full-range and clear stereo imaging
  • Easy to Install – Housing includes threaded M2.6 inserts—just two screws, no nuts—fitting standard ½″ headshells
  • Upgradeable Stylus System – Shares body with the VM95 family, so you can easily swap to elliptical (E), microline (ML), Shibata (SH), or 78 RPM stylus options
  • Solid Build Quality – Features low-resonance polymer body with aluminum cantilever, great for daily listening
    • Availability:
    In Stock
    Product Code:
    AT-VM95C
    Brand:
    Audio-Technica
    QAR 197.29
    Micro Less
    Update Last Updated: 2025-07-05 04:05:11
    Buy Now
    Compare this Product

     

    AT-VM95C

    VM95 series Conical stereo cartridge

    The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL

    Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata.

    • Aluminium cantilever
    • 4.0mV output voltage
    • Compatible body with all VM95 Series stylus assemblies
    • Replacement for AT91, AT91R and CN5625AL
     

    VM95 Series - Styli compatibility

    Every cartridge diamond stylus becomes worn after a period of play.

    Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

    Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

    The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

     

    AT-VM95C

    VM95 series Conical stereo cartridge

    The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL

    Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata.

    • Aluminium cantilever
    • 4.0mV output voltage
    • Compatible body with all VM95 Series stylus assemblies
    • Replacement for AT91, AT91R and CN5625AL

     

     

    VM95 Series - Styli compatibility

    Every cartridge diamond stylus becomes worn after a period of play.

    Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

    Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

    The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

     

    SPECIFICATION

     

    Model

    AT-VM95C

    Type

    VM Stereo Dual Magnet

    Mounting

    1/2” centres

    Frequency Response

    20 - 20,000 Hz

    Channel Separation

    18 dB (1 kHz)

    Output Channel Balance

    2.5 dB (1 kHz)

    Output Voltage

    4.0 mV (@ 1 kHz, 5 cm/sec)

    Vertical Tracking Angle

    23°

    Vertical Tracking Force Range

    1.8 - 2.2g (standard 2.0 g)

    Stylus Shape

    Conical

    Stylus Size

    0.6 mil

    Stylus Construction

    Bonded Round Shank

    Cantilever

    Aluminium Pipe

    Coil Impedance

    3.3 kΩ (1 kHz)

    Coil Inductance

    550 mH (1 kHz)

    DC Resistance

    485 Ω

    Static Compliance

    17 x 10 – 6 cm / dyne

    Dynamic Compliance

    6.5 x 10 – 6 cm / dyne (100 Hz)

    Wire Used for Coil

    T.P. Copper

    Recommended Load Impedance

    47,000 Ω

    Recommended Load Capacitance

    100-200 pF

    Cartridge Weight

    6.1g

    Dimensions

    17.2 x 18.9 x 28.3 ( H x W x D mm)

    Replacement Stylus

    AT-VMN95C

    Accessories Included

    Two 11 mm installation screws;
    Two 8 mm installation screws;
    Two washers

     

     

    General
    Brand
    • Audio-Technica
    Model
    • AT-VM95C
    Microless SKU
    • 26110
    Date first available
    • 08 May, 2019
    Shipping Weight
    • 0.20 Kg

    This website is designed to help you find the best prices for products in Qatar. It's a specialized platform that lets you easily search for product prices in the market. Just type the name or number of the product you're looking for in the search box above, hit the search button, and we'll display the results sorted by the best price.