انتكس 58901 غطاء إطار دائري، 457 سم/ 15 قدم

Intex Tarpaulin for metal frame poolThe tarpaulin prevents water contamination by leaves or other debris when the pool is not in use. The small holes of Intex The tarpaulin allows adequate ventilation of the pool. They also ensure that the tarpaulin can be easily removed from the pool even after a downpour. This cover sheet has an overhang of 25 cm and a sturdy attachment line. This allows the tarpaulin to be attached tightly to the pool and stays in place even in windy weather. NOTEMake sure that the mud pool cover is the correct size for the above ground basin. Two people are required to install the cover above the pool. Slowly pull the cover over the pool and tighten the cover rope attachment by waking up around the pool and gently pulling the rope attachment to the end where the ropes meet. Move the overhang of the pool cover so that the rope attachment can slide easily. Do not apply excessive force. The main purpose of the drain holes on the cover is to prevent water from accumulating, especially when it rains. If necessary, remove standing water first before removing the pool cover to minimize damage to the pool cover. The pool cover will sink in a little due to the weight of the pool cover. This is normal and does not affect the operation of the pool cover. Consumers may consider installing an inflatable swim ring/hose in the middle between the cover and the water surface.