Bluetooth amplifier board, XY-WRBT power amplifier module with remote control, stereo, Bluetooth audio receiver board WITH REMOTE | DIY Electronics | Mini Amplifiers & Sound Boards | Sound Systems

[Bluetooth Audio Receive Board] Material: PCB; Operating voltage: 3.7 – 24 VDC; Bluetooth version: 5.0; Transmission distance: about 15 meters (visible, barrier-free); SNR: 290dB
[High Performance] This module has the characteristics of anti-reverse connection, wide voltage operation, automatic return connection, rechargeable lithium battery and so on.
Good Sound Quality: Use Bluetooth 5.0 signal to stabilize sound quality and have good performance.
[Multiple power supplies are available] The power supply can use a micro-USB mobile phone charger, 3.7-4.2V lithium battery. 3.7-24V DC power supply, you can choose one of the three.
[Usage Notes] For battery-powered situations, turning off the power when not in use can save power and make it easier to modify. I short circuit the “on/off contact” for 2 seconds to set the decoder to turn on/off.

حالة التوفر :
متوفر
النوع :
الشركة :
بلوتوث العنابي .كيو اي
QAR30.00
العنابي
Update Last Updated: 2026-09-03 23:59:56
Buy Now
Compare this Product

Product description
Specs:

Item Type: Bluetooth Audio Receiver Board

Material: PCB
Purpose: Bluetooth 5.0 Decoder Board
Working Voltage: 3.7-24VDC
Bluetooth Version: 5.0.
Transmission distance: approx. 15m (visible without obstruction)
Signal to Noise Ratio: 290dB
Distortion: ≤70dB
Number of Channels: Dual Channel (Stereo)
Audio Interface : 3.5mm Audio Interface
Module protection mechanism: Power reverse connection protection
Remote control battery type: CR2025 (not included)
How to use:
1. After the power is turned on, the blue indicator light flashes quickly and enters the Bluetooth mode;
2. After transmitting the “prompt tone”, enter the pairing mode and wait for the pairing;
3. “XY-WRBT” (the device name of the power amplifier board) is found in the Bluetooth of the mobile phone.
4. Click “XY-WRBT” to connect. After the connection is successful, the “Tone” indicator will light up, and the music of the mobile phone can be played. The indicator flashes slowly when the music is playing;
5. After the Bluetooth is disconnected, the power amplifier board prepares for the second pairing, and after playing the “prompt tone”, it enters the pairing mode and waits for the pairing.

هذا الموقع هو منصة مختصة بالبحث عن اسعار المنتجات في قطر, لمساعدتك في البحث عن افضل سعر للمنتجات في السوق. اكتب اسم او رقم المنتج الذي تبحث عنه في مربع البحث بالاعلى واضغط على زر البحث, وسنقوم بإظهار الناتئج المطابقة مرتبة حسب افضل سعر.