Allows you to remove a crank, for example, to change your bottom bracket.
Features:
Length: 165 mmWidth: 44 mmThickness: 24 mmWeight: 190 gMaterial: Thermally hardened steel tool and plastic handle.
Compatibility:
Suitable for a standard adjustable wrench or a 17 mm wrench.Compatible crank types (e.g. Square taper, Octalink, ISIS)
What is this tool for?
The crank extractor is used to remove cranks from bicycle.It allows for clean removal without damaging the thread.
Advice from our team:
On the bike, loosen and remove the crank bolt with the Allen key side of the tool.Make sure that the crank thread is clean and fully threaded to avoid damaging the crank.Then screw the extractor fully and firmly into the crank.It is important that the tool is screwed in correctly, otherwise the thread on the crank may be stripped during the next step.Finally, screw in the push pin to remove the crank.
Warranty:
2 years
One tool for most of your cranks!Compatible with Shimano Octalink, ISIS Drive and square taper.
Allows you to remove a crank, for example, to change your bottom bracket.
