Description:
Technical Parameters:
Tigger signal Input voltage: 24V
Output type: non-contact type
Drive component: P/N channel FET
Maximum output current: 3A
Output voltage: DC5-12V-24V
Operating time: 1ms or less
Reset time: 1ms or less
Maximum switching frequency: 2000Hz
Horizontal group installation: standard rail mounting
Instructions:
X1~X7 are the access terminals of the trigger signal.
S/S is the selection terminal for the high and low levels of the trigger signal.
E.g:
When the trigger signal is high, then the S/S terminal should be connected to the negative terminal corresponding to the trigger signal.
Conversely, when the trigger signal is low, the S/S terminal should be connected to the positive pole corresponding to the trigger signal.
Size:
16CH: 145mm*80mm*40mm
Features:
1. New original high quality parts.
2. Compatible with positive control and negative control.
3. Input signal is isolated by optocoupler with strong anti-interference
4.The input terminal is equipped with status indicator for each channel.
5.High quality PCB carrier. Din rail mountable - for width 35 / 32 / 15mm rails.
Kit include:
IO card SCM PLC DC amplifier PNP to NPN optical coupling isolation solid state relay 24V, Note: high/low level