UGREEN USB-C to DB 9pin RS232 Cable 1.5m

The cable is designed to connect devices with an RS-232 connector via a USB Type-C connector.

PL2303GT chip has low cost and high performance of USB to RS232 conversion. The PL2303GT provides a convenient solution for connecting a full-duplex asynchronous RS-232 serial device to any Universal Serial Bus (USB)-enabled host. Compatible PL2303GT drivers can emulate a traditional COM port on most operating systems, allowing existing COM port based applications to easily migrate and be USB ready.

The PL2303GT integrates a high data rate RS-232 transceiver that complies with EIA/TIA-232F and CCITT V.28 communication interface specifications. 28. The RS-232 transceiver is a 3-transmitter and 5-receiver unit with a built-in high-efficiency charge pump circuit. It provides a bipolar output for transmitters and causes the transmitters to output RS-232 voltage output levels. During normal operation, the PL2303GT operates at very low power consumption and guaranteed data rates up to 1Mbps.

Features:

• Fully compliant with USB specification version 2.0 (Full Speed)
•  Integrated USB 1.1 transceiver and 5V to 3.3V regulator
•  Built-in clock generator 96 MHz
•  Integrated RS232 transceiver
•  Follow EIA/TIA-232F standards
• Full serial UART RS232 pins (TXD, RXD, RTS, KTS, DTR, DSR, DCD, RI)
•  Flexible support for data rates up to 1Mbps
•  Construction of three RS232 drivers
•  Five RS232 receivers (always active)
•  Hardware and software flow control
• On-chip OTP (One Time Programmable) ROM for writing starter configurations
• Each chip has a unique ID (for serial number)
•  1024-byte bidirectional data buffers (768-byte receive/256-byte transmit)