هذا الموقع هو منصة مختصة بالبحث عن اسعار المنتجات في الاردن, لمساعدتك في البحث عن افضل سعر للمنتجات في السوق. اكتب اسم او رقم المنتج الذي تبحث عنه في مربع البحث بالاعلى واضغط على زر البحث, وسنقوم بإظهار الناتئج المطابقة مرتبة حسب افضل سعر. 

  • Xiaomi 12V Max Brushless Cordless Drill

Xiaomi 12V Max Brushless Cordless Drill

حالة التوفر :
متوفر
النوع :
BHR5510GL
الشركة :
شاومي
JOD 79.00
بي سي اي
Update Last Updated: 2024-11-27 10:04:29
Buy Now
Compare this Product
Not yet rated Write a review

مواصفات المنتج

Specifications Security torx: T9H/T10H/T15H/T20H/T25H
Rated voltage: 12V⎓
Hex: H3/H4/H5/H6
No-load drilling speed:
  • 0–1400rpm (electric drill speed)
  • 0–370rpm (screwing speed)

Slotted: SL4/SL6
Y bit: Y1
Charging specifications: 5V⎓3A; 9V⎓1.5A
Tri-wing: 2.3
Charging time: 120–180min
Square: S0/S1
  • Drill bit type: Metal twist drill bit 3/4/5/6
  • Wood drill bit 4/5/6/7
U bit: U2.6
Extension rod: 60mm
  • Not suitable for use on concrete
  • The maximum torque error is ±5Nm due to the measurement device used. Torque test method: With the battery fully charged, the function selection button is pushed to enter screwing mode. A torque tester is then used to test the locked-rotor torque at level 30.
  • No-load speed tolerance is approximately 10%. Speed test method: The fully charged device is run for 2 minutes at no load and the no-load speed is then tested with a speed tester.
  • Screwing test method: With the device fully charged, the gearbox is adjusted to low speed (screwing mode). In manual "M" mode, the tail torque is adjusted to 10 and an M4 x 25mm self-tapping screw is screwed into the pine board until the battery runs out.
  • Steel plate drilling test method: With the device fully charged, the gearbox is adjusted to the high-speed setting (drilling mode). In M mode, the tail torque is adjusted to 30 and a hole is drilled into a 6mm-thick steel plate with a 6mm twist drill.
  • Wooden board drilling test method: With the device fully charged, the gearbox is adjusted to the high-speed setting (drilling mode). In M mode, the tail torque is adjusted to 30 and a 40mm-deep hole is drilled into a white pine board with a 7mm wood bit.
  • The whole unit compliance test report was issued by Waltek Services Test Group Ltd. in Foshan; Test Report No.: WTF21F3015226G.
  • The whole unit ROHS test report was issued by EMTEK (Dongguan) Technology Co., Ltd.; Test Report No.: ED201110010C.
  • The EMC test report was issued by EMTEK (Shenzhen) Co., Ltd.; Test Report No.: ES201110017E.
  • The environmental reliability test report was issued by Intertek Shenzhen Ltd.; Test Report No.: SZHH01513728.
  • The battery test report was issued by Precise Testing & Certification (Guangdong) Co., Ltd.; Test Report No.: PTC20110204401S-GB01.
  • The screwdriver bit test report was issued by the National Light Industry Tool Hardware Quality Supervision & Testing Station, Shanghai. Test Report No.: G20201629F. Hardness varies by ±2HRC.
  • Two extension rod designs are available and will be shipped randomly.
  • The water-repellent fabric test was conducted by Centre Testing International Co., Ltd. and is waterproof up to class 4–5; Test Report No.: A2210085110101C.
  • 30N·m

Package contents:
  • Electric drill x1
  • Storage pouch x1
  • Adaptor x1
  • Charging cable x1
  • Bit storage container x1
  • Drill bit x8 Screwdriving bit x24
  • Extension rod x1
  • User manual x1
Color Black