هذا الموقع هو منصة مختصة بالبحث عن اسعار المنتجات في الاردن, لمساعدتك في البحث عن افضل سعر للمنتجات في السوق. اكتب اسم او رقم المنتج الذي تبحث عنه في مربع البحث بالاعلى واضغط على زر البحث, وسنقوم بإظهار الناتئج المطابقة مرتبة حسب افضل سعر. 

  • QTA 202 25KG

QTA 202 25KG

حالة التوفر :
متوفر
النوع :
02012-15-312
الشركة :
القدس
JOD 6.50
Not yet rated Write a review

مواصفات المنتج

General description:

Flexible cement-base tile adhesive (copolymer powder of vinyl acetate and ethylene) of excellent quality where flexibility reach to 2.5 mm, Applicable for exterior surfaces and swimming pools.It meets the European standards: EN 12004/C2, EN 12004/C2T, EN 12004/C2E, EN 12004/C2TE, EN 12004/C2TES.

Special Features:
  • Excellent adhesion strength exceeds 1 N/mm².
  • Withstands high pressure, hence used for swimming pools tiles.
  • Excellent adhesion despite variation in temp.span (-5 to +60 °C). Also, product performance is resistant to shrinkage and expansion due to change of temperature and humid conditions.
  • Special "extended open time" features that enhances strength of adhesion
  • Product has anti-sagging properties that permits application for heavy tiles.
  • Flexible until 2.5mm.
  • Waterproof

Mixing:
  • Put clean water (without chemical additives) in clean mixing container
  • Mix at a ratio of ± 4 kg powder to ± 1 liter of water.
  • Stir by a hand agitator the admixture well for 30 seconds.
  • Make sure that everything is mixed
  • Use an electrical agitator to mix for 1 minute the admixture.
  • Wait for a 5 minutes period (settle-down) before application.

Preparation of surface:

  • Clean all foreign matter
  • Surface & tile must be moistened with water before applying the mixture, especially old surfaces.

 

Application:
  • Apply a layer of the admixture to the prepared surface using any trowel.
  • Use a notched trowel to spread the admixture layer to create air escape spaces.
  • Use plastic spacers based on desired joint width.
  • Place tile and push in.