XH-W1219 THERMOSTAT 12V Digital Red + Green Display Temperature Controller Module With NTC Waterproof Temperature Sensor | Sensors & Modules

Description:

 Model: XH-W1219

Power Supply: DC12V

Relay Current: 50mA

P0: Temperature Control Mode(Cooling/Heating): when first use this product, if it is used to heating, please set H, if used to cooling, please set C.

P1: Return Difference Setting(0.1~30 Celsius): long press SET key entering into the internal setting, choose P1 setting; then press SET key to achieve return difference value setting

P2: Temperature Calibration: this function is for temperature calibration. If the detection temperature and the actual temperature is different, then users can apply this function to calibrate

P3: Delay Start Time(0~10 minutes): this function is for compressor cooling

P4: Set High-Temperature Alarm Value(-50~110 Celsius): when the actual temperature is higher than this value, the screen will flash and sound an alarm

Restore Factory Settings: While power is on, press and hold the + - button for 3 seconds

Note:

Features:

Model: XH-W1219

Power Supply: DC12V

Relay Current: 50mA

Control Range: -50~110 Celsius

Control Precision: 0.1 Celsius

Measuring Input: NTC10K waterproof sensor L=0.5m

High Temperature Alarm: -49~110 Celsius

Input Voltage: DC 12V

Output Type: relay output 10A (max)

Return Difference Setting: 0.1~30 Celsius

Delay Starting: 0-10min

Temperature Calibration: -10~10 Celsius

Size: 60*43*16mm

Kit include:

1 x XH-W1219 Dual Display Digital Temperature Controller