MG996R Metal Gear 180 Degree High Speed High Torque Servo Motor (High Quality) | Motors & Drivers

Description:

• The MG996R Servo Torque at 4.8V 13.5kg/cm, 6V 15.2kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees;6.0V without load 0.15s / 60 degrees. Recommended voltage: 5V, current use: 3A.
• Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees
• This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).This high-speed standard servo motor can rotate 180 degrees (90 in each direction).
• The MG996R Servo model Good performance digital standard servo, compliant with most standard receiver connector, for Futaba, Hitec, Sanwa, GWS etc. Which can be a common use for robots, mechanical arms, climbing cars and remote control toys.
• Stable and shock-proof iron core motor, metal gears, power supply through external adapter. Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects.

Note:

• For engine powered airplane and boats, rubber must be used to reduce vibration.
• Torque over-loaded will damage the servo's mechanism.
• Please choose correct model for your application.
• Keep the servo clean and away from dust, corrosive gas and humid air.

Features:

• Storage Temperature Range: -30°C～80°C
• Operating Temperature Range: -25°C～70°C
• Gear type: 5 metal
• Dimension: 40.5mm*20mm*39.5mm
• Operating voltage: 4.8V 6.0V
• No load speed: 0.17sec/60° 0.15sec/60°
• Running current: 160mA 170mA
• Peak stall torque: 13.5kg.cm 15.2kg.cm
• Stall current: 1800mA±10% 2200mA±10%
• Command signal Pulse width modification
• Amplifier type: Digital controller
• Pulse width range: 500～2500usec
• Neutral position: 1500usec

Kit include:

1 x MG996R Digital Servo

1 x Set of Horns for Different Application (The Same with Above Photo)