Serial I2C to LCD | LCDs & LEDs

Description:

This is a RoHS compliant I2C Serial LCD Daughter board that can be connected to a standard HD44780 compatible 16x2 or 20x4 Character Display Module that supports 4 bit mode. All Character Modules sold on our site support 4 bit mode, and nearly all commercially available 16x2 and 20x4 line character modules support it too.

This board has a PCF8574 I2C chip that converts I2C serial data to parallell data for the LCD display. There are many examples on internet for using this board with Arduino. Do a search for "Arduino LCD PCF8574". The I2C address is 0x3F by default, but this can be changed via 3 solder jumpers provided on the board. This allows up to 3 LCD displays to be controlled via a single I2C bus (giving each one it's own address).

• 5V power supply
• Serial I2C control of LCD display using PCF8574
• Backlight can be enabled or disabled via a jumper on the board
• Contrast control via a potentiometer
• Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing
• Size：41.6mm x 19.2mm