Seeed Studio, CAN-BUS Shield V2 | Sensors & Modules

Description:

The Seeed Studio CAN-Bus Shield is a module based on the CAN MCP2515 controller and the MCP2551 transceiver. This card module can be simply plugged into an Arduino module to allow it to communicate via the CAN bus or ODB-II. This Shield has a micro-SD card reader communicating via the SPI bus. The CAN bus is an industrial bus commonly used because it allows long-distance communication without compromising on communication speed and its reliability.

Features:

• Implements CAN V2.0B at up to 1Mb/s
• Industrial standard 9 pin sub-D connector
• OBD-II and CAN standard pinout selectable
• Changeable chip select pin
• Changeable CS pin for TF card slot
• Changeable INT pin
• Screw terminal that easily to connect CAN_H and CAN_L
• Arduino Uno pin headers
• 2 Grove connectors (I2C and UART)
• SPI Interface up to 10MHz
• Standard (11bit) and extended (29bit) data and remote frames
• Two receive buffers with prioritized message storage

Applications:

1. Industrial monitoring systems
2. Data-logger
3. Embedded diagnostic tools

Kit include:

1 x CAN-BUS Shield V2