MPS20N0040D Ported Pressure Sensor Breakout Board | Electronic Components | TwinsChip

MPS20N0040D Ported Pressure Sensor Breakout Board

Describtion:

The MPS20N0040D is a gauge pressure transducer that approximates pressures from roughly 0kPa - 40kPa. The sensor uses an Hx710B 24-bit analog-to-digital converter (ADC) and signal amplifier to amplify the output from the MPS20N0040D to 0V - 5V. The response of the MPS20N0040D can be approximated using an Arduino board via 2-wire serial protocol.

Features: 

• This DIP air pressure sensor is suitable for biomedical, meteorology and other fields. The core part is pressure sensor chip which is make by the MEMS pressure technology.
• With wide applicable temperature range.
• Easy to use and install.
• Fits for the following types:
• 1. Automobile: tire pressure gauge, vehicle-mounted air pump, the MAP sensors, diagnostic equipment, automotive sensors.
• 2. Industry: air brake switch, portable pressure gauge, such as digital pressure gauge, environment monitor.
• 3. Medical equipment: patient monitoring and diagnostic equipment, such as blood pressure monitor, medical instrument, and monitor.

Specifications:

• Measuring medium: air
• Measuring range: 0-40kPa
• Operating temperature range: -40 ° ~ + 125 °
• Storage Temperature: -40 ° ~ + 150 °
• Humidity: (50% ± 10%) RH
• Ambient temperature: (25 ± 1) °
• Medium temperature: (25 ± 1) °
• Output impedance: 4kΩ ~ 6kΩ
• Zero output: -15mV~+15mV
• Hysteresis: +-0.7%F.S.
• Power supply: ≤10V DC or ≤2.0mA DC
• Insulation resistance: 100MΩ, 100VDC

Package Included:
1 x DIP Air Pressure Sensor