ValueRAM's KVR32S22S8/8 is a 1G x64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM),1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGAcomponents. The SPD is programmed to JEDEC standard latencyDDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin DIMM usesgold contact fingers. The electrical and mechanical specificationsare as follows:

22 cycles

45.75ns(min.)

350ns(min.)

32ns(min.)

94 V-0

0 C to +85 C

-55 C to +100 C

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• Low-power auto self-refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank • On-board I2 serial presence-detect (SPD) EEPROM
• 8 internal banks; 2 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.18” (30.00mm)
• RoHS Compliant and Halogen-Free