IO PLC card SCM DC amplifier PNP to NPN optical coupling isolation solid state relay 24V - high/low level - BMZ16TN |

Description:

Technical Parameters:

Tigger signal Input voltage: 24V
Output type: non-contact type
Drive component: P/N channel FET
Maximum output current: 3A
Output voltage: DC5-12V-24V
Operating time: 1ms or less
Reset time: 1ms or less
Maximum switching frequency: 2000Hz
Horizontal group installation: standard rail mounting

Instructions:
X1~X7 are the access terminals of the trigger signal.
S/S is the selection terminal for the high and low levels of the trigger signal.

E.g:
When the trigger signal is high, then the S/S terminal should be connected to the negative terminal corresponding to the trigger signal.
Conversely, when the trigger signal is low, the S/S terminal should be connected to the positive pole corresponding to the trigger signal.

Size:

16CH:  145mm*80mm*40mm

Features:

1. New original high quality parts.

2. Compatible with positive control and negative control.

3. Input signal is isolated by optocoupler with strong anti-interference

4.The input terminal is equipped with status indicator for each channel.

5.High quality PCB carrier. Din rail mountable - for width 35 / 32 / 15mm rails.

Kit include:

IO card SCM PLC DC amplifier PNP to NPN optical coupling isolation solid state relay 24V, Note: high/low level