Schneider Space Logic Digital Thermostat Fan Coil On/Off LCD 2P 3 Fans TC903-3A2L - Pack of 5

The TC900 Series fan coil thermostats are optimized for office building, hotel, hospital and residential applications. The TC900 Series can be used for 2-pipe or 4-pipe applications. Available in two housing finishes: optimum (black glass display with capacitive buttons on a white base) or medium (white glass display with mechani cal buttons on a white base). The TC900 Series is both easy to operate and install. The devices feature microprocessor-based control and large backlit LCD screens which display operation status (cooling, heating, and ventilation), fan speed, room temperature and set-point. Functions Set-point Adjustment The set-point buttons allow users to adjust the set point (in 0.5 °C increments) for the space. Fan Speed Users can select a fan speed (High, Medium, Low or Automatic) by a short press of the FAN/ECO button (TC903) or the FAN button (TC907). Mode Control Users can switch operating modes (Heating, Cool ing, or Ventilation) by pressing the Mode button. Eco Mode To begin Eco mode, do a short press of the FAN/ ECO button (TC903) or the ECO button (TC907) until the ECO icon flashes in the lower right corner of the LCD display. In Cooling mode, the set-point is automatically adjusted to 26°C and the fan speed is set to Low. In Heating mode, the set-point is automatically adjusted to 18 °C and the fan speed is set to Low. To exit Eco mode, do a short press of the FAN/ECO button (TC903) to choose any other fan speed, as desired, or do a short press of the ECO button (TC907) to cancel Eco mode. Button Lockout Function This function allows the buttons to be deactivated to prevent thermostat operation by others. Low Temperature Protection If the room temperature drops below 5 °C, Heating mode will start automatically and the fan speed will be set to High. Once the temperature reaches 7 °C, the thermostat will switch off the output. Alert In the event of an operating exception, the thermo stat will attempt to command the valve to close