مكبر صوت احترافي RCF NX 915-A Active، مقاس 15 بوصة، ثنائي الاتجاه، كامل النطاق، قوة 2100 واط، مستوى صوت 131 ديسيبل، معالج إشارة FiRPHASE وBMC، هيكل خشبي، نقاط ربط M10، أسود | NX-915A

NX 915-A

PROFESSIONAL ACTIVE SPEAKER

NX 915-A is masterfully engineered from the ground up to deliver stellar audio performances for solo musicians, bands, and DJs. The combination of a 1.75" compression driver, a 15" woofer, a two-channel 2100W amplifier, and a constant directivity waveguide produces coherent 100° x 60° coverage for the listening area with up to 131 dB SPL, distortion-free sound. Used stand-alone speaker for FOH system, satellite (with subwoofer), stage monitor, or flown speaker, the NX 915-A blends high performance and reliability in a compact package. Blending RCF proprietary FiRPHASE and Bass Motion Control DSP processing, NX 9 Series speakers are perfectly tuned for each model, delivering absolute clarity and deep, powerful bass response. The tour-ready, rugged all-wood cabinet is easy to carry and secure to install on a pole-, flown-, wall-, or truss-mounted using the dedicated rigging points available.

Key Features

• Advanced DSP with 3 Presets

• FiRPHASE Filters for Coherent Sound

• Bass Motion Control Low-Freq Management

• Combination XLR-1/4" Input + XLR Output

• 45 Hz to 20 kHz Frequency Response

• 131 dB Max SPL Output

• True Resistive Waveguide Technology

• 15" Woofer + 1.75" Compression Driver

• Configurations for Floor, Stage, Flown

• Includes Power Cord

Specifications

Enclosure Type	Bass-Reflex Loudspeaker/Floor Monitor
Total Power Capacity	2100 W Peak
Amplifier Power Rating	LF (Low Frequency): 1400 W Peak
	HF (High Frequency): 700 W Peak
Amplifier Class	Class-D
Drivers	HF Driver: 1 x 1" / 25.4 mm Polyimide Compression Driver
	HF Voice Coil: 1.75" / 44.45 mm
	MF Driver: No
	LF Driver: 1 x 15" / 381 mm Woofer
	LF Voice Coil: 2.5" / 63.5 mm
	Magnet: Neodymium
Performance	Frequency Response: 45 Hz to 20 kHz
	Maximum SPL: 131 dB (Peak)
	Coverage Angle: 100° H x 60° V
Input Sensitivity	+4 dBu to -2 dBu
Protections	RMS, Signal Limiter, Thermal
Connectivity	Audio I/O: 1 x Combo XLR-1/4" TRS Female Balanced/Unbalanced Input
	1 x XLR 3-Pin Male Balanced Thru/Output
Network I/O	No
USB	No
Wireless Connectivity	No
Signal Processing	Crossover: 1600 Hz (Internal)
	EQ: No
	Parametric EQ: No
	Semi-Parametric EQ: No
	Dynamic Processing: Soft Limiter
	Alignment Delay: No
	Phase Adjustment: No
	DSP: FIR Filter, Venue Settings
Power	AC Input Power: 100 to 120 VAC, 60 Hz
	AC Power I/O: 1 x IEC Input
	Power Consumption: 300 W
Physical	Mounting: 2 x M10 Fly Point (Top), 1 x M10 Fly Point (Each Side), 1 x M10 Fly Point (Bottom), 1 x M10 Fly Point (Rear), 1 x Pole Socket (Bottom)
	Handles: 1 x Each Side
	Cooling: Convection, Heat Sink
	Construction Material: Plywood, Stainless Steel Grille